Question: 1
A workstation has been connected to a workgroup Ethernet switch using a Category 5e cable. The workstation can connect to the rest of the network through the switch (The switch has full connectivity.)/ but is performing much slower than expected. Interface statistics on the switch reveal many "runts" are being detected. Software capable of reading the counters on the workstation NIC indicates many FCS and alignment errors are occurring. What is the most likely cause of these errors?
Question: 2
To improve delay and jitter on frame relay links, we can fragment and assemble the frame between multiple PVCs. This is similar to what happens with PPP multilink.
Question: 3
As shown in the following figure, what routes can R2 learn?
Question: 4
You try to perform a traceroute to an Internet destination from your PC, but the traceroute hangs when it reaches the router. There is an inbound access-list applied to the serial interface on the Internet router with a single line: "rule 5 permit tcp source any destination any." What access-list entry may need to be added to the access-list in order to get traceroute to work?
Question: 5
During the process in which IS-IS establishes a neighbor relationship, IS-IS does not send CSNP packets on a P2P network.
