Question: 1
Which version of the SNMP protocol supports encryption features?
Question: 2
In the STP protocol, assume that all switches have the same priority, and the MAC address of switch 1 is 00-e0-fc-00-00-40, switch 2
The MAC address of the switch is 00-e0-fc-00-00-10, the MAC address of switch 3 is 00-e0-fc-00-00-20, and the MAC address of switch 4 is 00-e0-fc-
00-00-80, then the root switch should be ().
Question: 3
As shown in the figure, the network administrator creates VLAN 2 on the SWA and SWB, and configures the ports connected to the host on the two switches as access terminals.
Port, into VLAN 2. Configure G0/0/1 of SWA and G0/0/2 of SWB as trunk ports to allow all VLANs to pass. Then we have to implement two
Hosts can communicate normally, and () is required.
Question: 4
When upgrading the router software using the FTP protocol, the transfer mode should be selected ().
Question: 5
The error about the above configuration command is ().
system-view
[Huawei]user-interface console 0
[Huawei-ui-console0]user privilege level 15
[Huawei-ui-console0]authentication-mode password
[Huawei-ui-console0]set authentication password cipher huawei2012
[Huawei-ui-console0]quit
